Warlock Engineering conduct research on wind energy technology. Our main objective has always been to reduce the cost without sacrificing the wind turbines performance or reliability. The papers presented below offer cost affordable and simplified designs for the homemade wind turbine builder. All turbines have been built for a fraction of the cost of commercial wind turbines with basic tools found in any home workshop.
Keywords: Axial Flux Pancake Generator, Carbon Fibre Blades, Wind Turbine Blade Calculator Software, Dump-Load Charge Controller, Wind Turbine Plan Generator, Wind Turbine Blade Design, VAWT, HAWT, PMG, Permanent Magnet Generator.

Warlock Engineering
Wind Energy Technology

"10 kW, 15Phase Axial Flux Pancake Generator for 2-Blade Wind Turbine"
4th November 2003
"10 kW (13 m/s), 5 Metre Diameter Carbon Fibre Blades for Wind Turbine"
11th November 2003
"Wind Turbine Blade Calculator, Free Software"
9th January 2003 - present
"1.4 Metre Diameter 3-Blade Wind Turbine Construction" 
"1.8 Metre Diameter Carbon Fibre Wind Turbine Blades and Generator "
"The Darrieus Disaster"
"Interactive Wind Turbine Blade Calculator 2011"
"Online Wind Turbine Calculator"
"Design and Construction of a Wind Turbine Dump-Load Charge Controller"
3rd  May 2004
25th February 2008 [Plans Available]
30th March 2009
14th December 2009
31st March 2011
31th January 2006
Frequently asked questions about plan orders, blade design, electrical work and generator matching can be found on our Q&A pages.
Microwave Chemistry Reactor
Chemistry Articles
Microwave Chemistry Reactor [HTML]
Dielectric ‘Loss Factor’ (e’’) Measurement Over RF Frequencies Between 0.1 - 40.0 GHz for Common Organic Chemicals [HTML]
Deconstruction of a 300 MHz Cryomagnet for NMR Spectroscopy [HTML]
Design custom blades for your generator and calculate power output at each wind speed.
Free sample chord sections can be generated for 0.70 m to 0.80 m blades (550 Watts - 710 Watts).
Preview of bonus material included with every purchase
Free plans for 500 W blades with each purchase.
Blade Calculator
"Wind Turbine Blade Calculator 2015"
23rd October 2015
Home  |  Contact  |  FAQ
1.4 Metre Diameter 3-Blade Wind Turbine Construction
1.4 Metre Diameter 3-Blade Wind Turbine Construction